Meltblown Cloth Industrial Air Conditioner

Baochiyuan's main products: air coolers, oil coolers, water chillers, cooling towers, air conditioners, constant temperature and humidity air conditioners, heat pump units, heat recovery refrigerators, clean air handling units, etc.

Meltblown Cloth Industrial Air Conditioner (Air Cooler)

Some reasons for the brittleness and hardening of meltblown cloth
Uneven spinning, insufficient air volume of the air cooler! Resulting in uneven heat dissipation, generating internal stress leading to brittleness! It can be improved by adjusting the melt volume of the extruder, adjusting the temperature of the hot air blower, and increasing the air volume of the air cooler!

The meltblown cloth industrial air conditioner produced by Baochiyuan has a large air volume and adjustable outlet temperature of 5-20 degrees, making it a good helper for solving your problems.

Detailed Introduction

Meltblown Cloth Industrial Air Conditioner

I. Working Principle of the Meltblown Cloth Industrial Air Conditioner

According to the principle of the refrigeration system, the low-temperature and low-pressure liquid refrigerant undergoes heat exchange with the surrounding air in the evaporator. The evaporator absorbs the heat from the air, evaporating into a low-temperature and low-pressure gaseous state. During the evaporation process, the temperature of the refrigerant remains unchanged. The low-temperature and low-pressure gaseous refrigerant enters the compressor, where it is compressed into a high-temperature and high-pressure gaseous state, then enters the condenser. In the condenser, it undergoes heat exchange with the indoor medium. Part of the heat from the high-temperature and high-pressure gaseous refrigerant is absorbed by the medium, raising the temperature of the medium. The refrigerant releases heat, and the condenser turns into a high-temperature and high-pressure liquid. The temperature during the condensation process remains unchanged. It then enters the expansion valve for throttling, which is a rapid cooling process. The refrigerant becomes a low-temperature and low-pressure liquid. After this process, the refrigerant re-enters the evaporator for heat exchange and evaporation, thereby completing the entire refrigeration system process. This cycle continues continuously, allowing the air to be continuously cooled. The cooled air is then blown to the area requiring cooling by the fan.

II. Classification of Air Coolers

1. By Cooling (Heat Dissipation) Method

A. Water-cooled air cooler: (Shell and tube type) condenser equipped with a cooling tower for heat dissipation.

B. Air-cooled air cooler: (Finned type) condenser dissipates heat through the unit's own fan.

Air cooler selection: Generally, the appropriate water-cooled or air-cooled air cooler is selected based on the cooling capacity (air volume and temperature).

Characteristics of air-cooled type: Named after the heat dissipation method, it contains a finned condenser inside the unit for heat dissipation, eliminating the need for an additional cooling water tower. Installation and movement are very convenient. However, it requires good ventilation in the workshop environment; otherwise, it will directly affect the cooling effect.

Characteristics of water-cooled type: Water-cooled air coolers require additional installation of a cooling water tower and water pump to extract hot water for heat dissipation to achieve efficient cooling效果.